Home > Usb Device > Usb Device Offlined Not Ready After Error Recovery

Usb Device Offlined Not Ready After Error Recovery

Intel Core i7-950 / Asus P6X58D-E / Nvidia GTX480 / siduction 64-bit on OCZ Revodrive SSD / KDE4.10.2/ Kubuntu 13.04 Adv Reply June 17th, 2011 #5 TerryT View Profile View To do this automatically, you want to disable the loading of ehci_usb at boot, I think it might be somewhere in /etc/hotplug - grep for ehci_hcd Option 2: An ugly hack I played with it for a while, plugging it and unplugging.. No problem on XP, I reformatted it as a FAT32 volume. http://cloudindet.com/usb-device/usb-device-not-recognized-windows-8-device-descriptor-request-failed.html

We Acted. And what more I don't have to have the drive attached during boot but I can do it later when system is already on and it still gets detected. kernel: sda: Write Protect is off kernel: sda: I/O error: dev 08:00, sector 0 kernel: I/O error: dev 08:00, sector 0 kernel: unable to read partition table and I cannot mount kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 kernel: Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 1 kernel: SCSI device

While there, I recorded what dmesg said when the drive successfully loaded. Not the answer you're looking for? fjleal5th June 2004, 07:19 AMI've tried on several machines, several distros (FC1, FC2, Mandrake 9.1, Mandrake 10.0 CE), different USB port versions (1.1, 2.0)... How to check whether someone viewed/copied a video?

Disproving Euler proposition by brute force in C Why does WordPress use outdated jQuery v1.12.4? Since you used NTFS (not a good fs for large drives in my opinion, but then - there is no good alternative to work with Windows either), the filesystem might need Can you mount the stick elsewhere? imdeemvp30th December 2004, 07:26 PMDavid59, Did you try doing this?

As I remember I had similar problems under gentoo (a lot kernel versions ago) - fixed it by NOT compiling the {u,o,e}hci_hcd modules into the kernel - but compiling them as Still the same problem on Linux. But it seems that usb-storage gives I/O error : dmesg sda : READ CAPACITY failed. Ubuntu 11.04 -> failed.

I loaded up Ubuntu 10.10 so I could get all the files. One is a Seagate ST32000542AS which is on the compatibillity list. Output a googol copies of a string very lightweight low power microcontroller with memory? I would prefer to connect it quietly (without warnings) or not trying to connect the disk at boot at all and then kde should take care of it when logged into

Join them; it only takes a minute: Sign up Here's how it works: Anybody can ask a question Anybody can answer The best answers are voted up and rise to the Last edited by Atronach (2012-04-03 02:24:10) Offline #2 2011-09-03 17:13:10 ewaller Administrator From: Pasadena, CA Registered: 2009-07-13 Posts: 13,634 Re: [SOLVED] Hard Drive not detected I may be confused here, there Hope this helps someone. [ 142.777698] usb 2-1.2: USB disconnect, address 3 [ 151.417332] usb 2-1.2: new high speed USB device using ehci_hcd and address 5 [ 151.561647] scsi8 : usb-storage The drive is not found with fdisk -l or gparted.

Originally posted by fjleal I've tried on several machines, several distros (FC1, FC2, Mandrake 9.1, Mandrake 10.0 CE), different USB port versions (1.1, 2.0)... his comment is here If there is a usb bridge then it is usb, even so sata drives should be hot swappable if the chipset and drivers support it.Judging by the messages you get when As you can see from the above kernel log, I have a 256MB card mounted in the CF slot on plugging it in (sda), and nothing in the second (SD/SmartMedia) slot If you have any questions, please contact customer service.

Learn More Red Hat Product Security Center Engage with our Red Hat Product Security team, access security updates, and ensure your environments are not exposed to any known security vulnerabilities. The machine is up to date. It is at a lower level with the USB driver subsystem. this contact form What are the German equivalents of “First World War”, “World War I”, and “WWI”?

www.linuxhardware.net ewest028th October 2004, 07:41 PMFWIW, in my case the USB card reader and media were working just fine with RH9. What are the alternatives of compound interest for a Muslim? It seems that each time it does not finish for some reason.

I think the usb hook shouldn't be required since it's meant for usb root devices or when connecting at early start which is not my case, USB sticks don't need the

Any hint? Possible causes I can think of: The drive electronics shipped with the enclosure is set to use non-standard-compliant communication settings or device powering. Tango Icons Tango Desktop Project. from dmesg: SCSI error : <4 0 0 0> return code = 0x10070000 end_request: I/O error, dev sda, sector 42 I tried all solutions published on this forum.

I changed partition to Ext3 - works fine, can I mount, read, write and umount, back to fat32 - get error "can't read superblock". My USB flash disk was supported by FC2, but it's no longer supported by FC3 !! :-( mute16th January 2005, 01:08 PMI also have a 256MB Transcend USB flash drive, running I connected the drive to an Windows XP system and split the drive into two NTFS partitions, 1.5 TB each. navigate here Why do we need blockchains?

Last edited by Atronach (2011-09-29 08:26:17) Offline #7 2011-09-29 09:48:48 R00KIE Forum Moderator From: Between a computer and a chair Registered: 2008-09-14 Posts: 3,501 Re: [SOLVED] Hard Drive not detected In but it is very slow (really annoying on anything more than 3MB). sd 7:0:0:0: rejecting I/O to offline device sd 7:0:0:0: [sdb] Write Protect is off sd 7:0:0:0: [sdb] Mode Sense: 00 00 00 00 sd 7:0:0:0: rejecting I/O to offline device sd